Finding a rail to rail op amp that suits your need and does its job well can be challenging. Overall, our tester reviews these rail to rail op amp with giving ratings and marks for its durability, ease of setup and use. Also the rail to rail op amp price will be fairly matched the product’s performance, plus with the attractive and sturdy design etc that comes with the product. We conducted hands-on testing for rail to rail op amp and have the details guide and list provided below.
This is the ultimate buyers guide rail to rail op amp.
Our Top Picks
The Best rail to rail op amp
Op Amp - Dual Rail-to-Rail - 2.7-6V Power @ 80mA Output - TLV2462 Adafruit 808
$7.99
in stock
Amazon.com
as of July 1, 2024 4:37 pm
Features
| Part Number | 808 |
| Model | 808 |
MCP6002-I/P DIP-8 1 MHz Gain Bandwidth Product, Low-Power Op Amp Pack of 6 Pcs
$12.99
in stock
Amazon.com
as of July 1, 2024 4:37 pm
Features
- MCP6002-I/P DIP-8 1 MHz Low-Power Op Amp
- Gain Bandwidth Product: 1 MHz (typ.)
- Industrial: -40°C to +85°C
- package 6 pcs
- Supply Voltage: 1.8V to 5.5V Supply Current: IQ = 100 μA (typ.)
Juried Engineering TLV271IP TLV271 T271IP Single 16V, 3MHz, 550-uA/ch, Rail-to-Rail Output Operational Amplifier Op Amp Breadboard-Friendly IC DIP-8 (Pack of 2)
$8.49
in stock
Amazon.com
as of July 1, 2024 4:37 pm
Features
- Rail-to-Rail Output, Specified Temperature Range: Industrial Grade: −40°C to 125°C
- Wide Bandwidth: 3 MHz, Input Bias Current: 1 pA
- High Slew Rate: 2.4 V/µs, Input Noise Voltage: 39 nV/√Hz
- Supply Voltage Range: 2.7 V to 16 V, Supply Current: 550 µA/Channel
- Example Applications: E-Bike, Power Banks, Smoke detectors, Solar Inverters, Low-Power Motor Controls, Battery-Powered Instruments, Building Automation
Juried Engineering TLC2274AIN TLC2274A TLC2274 Advanced LinCMOS™ Rail-to-Rail Quad Precision Operational Amplifier Op Amp Breadboard-Friendly IC DIP-14 (Pack of 5)
$25.98
in stock
Amazon.com
as of July 1, 2024 4:37 pm
Features
- The TLC2274 are quadruple operational amplifiers from Texas Instruments. The TLC2274 devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications.
- Output Swing Includes Both Supply Rails, Low-Input Bias Current: 1-pA Typical
- Low Noise: 9 nV/√Hz Typical at f = 1 kHz, Fully-Specified for Both Single-Supply and Split- Supply Operation
- Common-Mode Input Voltage Range Includes Negative Rail, High-Gain Bandwidth: 2.2-MHz Typical
- High Slew Rate: 3.6-V/µs Typical, Low Input Offset Voltage: 950 µV Maximum at TA = 25°C
JESSINIE 3Pcs MCP6022 Amplifier Module CJMCU-622 Microphone Sound Sensor Module 3V 10MHz Rail-to-Rail Operational Amplifier Module High Performance Rail-torail Input Output OP Amps
out of stock
Amazon.com
as of July 1, 2024 4:37 pm
Features
- Voltage power supply: 3V, Operating temperature: -40℃ ~ 85℃, Output mode: simulation, All-round, MaxRF protection, sensitivity:-42 dbv/pa
- Key specifications include: wide bandwidth (10 MHz), low noise (8.7 nV/√Hz), low input offset voltage and low distortion (0.00053% THD+N).
- Low Offset Voltage: Industrial Temperature: ±500 µV (maximum) / Extended, Temperature: ±250 µV (maximum), Temperature Range:Industrial: -40°C to +85°C / Extended: -40°C to +125°C
- Low Supply Current: 1 mA (typical)
- Suitable for Automotive, Multi-Pole Active Filters, Audio Processing, DAC Buffer, Test Equipment, Medical Instrumentation
Juried Engineering Microchip MCP602-I/P MCP602 Dual Operational Amplifier Op-Amp 2.8MHZ 2.3V/us DIP-8 Breadboard-Friendly (Pack of 1)
$7.43
in stock
3 new from $1.52
Amazon.com
as of July 1, 2024 4:37 pm
Features
- The MCP602 operational amplifiers (op amps) utilize an advanced CMOS technology, which provides low bias current, high speed operation, high open-loop gain and rail-to-rail output swing.
- Specifications rated from 2.7V to 5.5V supplies, Rail-to-rail swing at output
- Common-mode input swing below ground
- 2.8MHz GBWP
- Unity gain stable
DROK Micro Boost Voltage Converter DC 4.8-35V to DC ±15V Positive Negative Dual Output Module 660mA Power Regulator Step Up Volts Transformer Board for OP-Amps
$12.99
in stock
Amazon.com
as of July 1, 2024 4:37 pm
Features
- DROK micro voltage converter with low voltage input range DC 4.8-35V, positive and negative dual output voltage is ±15V, rated output current is 660mA.
- APPLICATION: the step-up regulator module is suitable for sensor, operational amplifier, audio and other devices that needs positive-negative power output.
- SMALL MODULE HIGH EFFICIENCY: DROK boost converter is with small dimension 64x27.5x12.5mm; the small module conversion rate can be up to 88%.
- TWO MOUNT METHODS: the volt transformer module not only support row pin welding, but also lead mounting, which will be convenient for your use.
- NOTE: please note that although the module is with short circuit protective function, it can not in long continuous short circuit, or it will be damaged.
The Final Mission of Extortion 17: Special Ops, Helicopter Support, SEAL Team Six, and the Deadliest Day of the U.S. War in Afghanistan
$34.90
in stock
5 new from $34.90
14 used from $12.99
14 used from $12.99
Amazon.com
as of July 1, 2024 4:37 pm
Features
| Color | Multicolor |
| Release Date | 2017-09-19T00:00:01Z |
| Language | English |
| Number Of Pages | 240 |
| Publication Date | 2017-09-19T00:00:01Z |
Bridgold 10pcs MCP6002 6002 MCP Low Power Op Amp 1 MHz Bandwidth,DIP-8.
$7.49 in stock
Amazon.com
as of July 1, 2024 4:37 pm
Features
- 1 MHz Gain Bandwidth Product (typ.)
- Rail-to-Rail Input/Output
- Supply Voltage: 1.8V to 5.5V
- Supply Current: IQ = 100 µA (typ.)
- 90° Phase Margin (typ.)
IC Assortment Box 75 pcs, PC817c, NE555, LM358, LM324, JRC4558D, LM393, LM339, NE5532, LM386, PT2399, TDA2822, TDA2030A, UC3842AN, UC3843AN, ULN2803APG, ULN2003AN and Sockets
$16.90
in stock
Amazon.com
as of July 1, 2024 4:37 pm
Features
- IC Assortment Box contains 58pcs IC, 18 pcs IC sockets
- PC817c, ULN2803APG, NE555, LM358, LM324, JRC4558D, LM393, LM339, NE5532, LM386, PT2399, TDA2822, TDA2030A, UC3842AN, UC3843AN, ULN2003AN
- Including IC sockets: DIP-8 10 pcs, DIP-14 4 pcs, DIP16 2 pcs, DIP18 2 pcs
- All important and usefull types of Integrated Circuits sorted accordingly into 1 Box
The Video Review of Best rail to rail op amp
Conclusion
When you’re looking for rail to rail op amp, you’ll want to keep a few things in mind. First, decide what you want to use the rail to rail op amp for. Next, check the product reviews with comparision which we have listed as well. Once you’ve decided on rail to rail op amp you want to buy rail to rail op amp, look at the reputation of the manufacturer as well. You can compare prices and quality together before you make your purchase.