Finding a artillery 3d printer that suits your need and does its job well can be challenging. Overall, our tester reviews these artillery 3d printer with giving ratings and marks for its durability, ease of setup and use. Also the artillery 3d printer price will be fairly matched the product’s performance, plus with the attractive and sturdy design etc that comes with the product. We conducted hands-on testing for artillery 3d printer and have the details guide and list provided below.
This is the ultimate buyers guide artillery 3d printer.
A Quick Comparison of Our Favorites
6
Artillery Genius Pro 3D Printer, High Precision 3D Printing Machine, with Touch Screen Controller...
Check Price On Amazon
Amazon.com
The Best artillery 3d printer
Artillery Sidewinder X2 3D Printer, SW-X2 FDM 3D Printers Newest Model Auto Leveling, 32-Bit Silent Motherboard 95% Pre-Assembled Resume Printing Function Build Volume 300x300x400mm
$399.00
in stock
Amazon.com
as of May 23, 2023 6:52 am
Features
- [Direct Drive Extruder] The advanced Titan extruder solves most of the problems of filament clogging and uneven extrusion, and achieves high-precision printing. And the maximum printing speed of 150 mm/s realizes high-efficiency printing.
- [Dual Z-Axis Synchronization System] Dual Z-axis design, double screw drive, makes sure the X-Axis always move parallel to the lattice glass build platform and improves the printing quality.
- [Automatic Leveling] The Artillery Sidewinder sw-x2 3d printer adopts an intelligent auto bed leveling design, it can automatically adjust the hot bed before printing. And the hot bed can be heated to 110°C within 2 minutes.
- [Resume Printing Function] The Sidewinder x2 has the function of detecting the exhaustion of filament or power failure, and continuing to print from the position where printing stopped last time after recovery.
- [Ultra-Silent Printing] 32-bit silent motherboard and exclusive ultra-quiet stepper driver effectively reduce working noise and achieve low-decibel printing mode. Even when the machine works during night, it will not affect your sleep.
Artillery Sidewinder SW-X2 3D Printer Latest Model Ultra-Quiet Printing 300x300x400mm Automatic Leveling Power Failure Recovery 95% pre-Assembled 110V-220V Free Switching
$399.99
in stock
Amazon.com
as of May 23, 2023 6:52 am
Features
- The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, makes high quality print, especially for flexible filament. When it arrives on your doorstep, the Sidewinder X2 comes 95% pre-assembled, which makes installation easy as can be.
- The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. With the Lattice glass smooth headbed surface, it makes all types of filaments can be easily stick on.
- There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System greatly increase its printing stability.
- SW-X2 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically pauses your 3D print and notifies you when you've run out of filament, saving you time and money.
- With a 300 x 300 x 400 mm build volume, the Sidewinder X2 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive ultra-quiet stepper drivers which significantly reduce the noise level. SW-X2 overhauled the motion system on the Z, replacing the leadscrews with a belt-driven system, which not only reduces the noise level but also allows for faster print speeds.
Artillery Genius Pro 3D Printer, High-Precision Dual Z-Axis Hot Bed Protection Filament Runout Detection, Power Failure Resume Quiet Printing 220x220x250mm
$350.00 in stock
Amazon.com
as of May 23, 2023 6:52 am
Features
- Powerful High-Quality - DIY all in one structure, 95% pre-assembly, 220 x 220 x 250 mm print size. Intelligent automatic bed leveling. Wide-voltage heat bed protection. With touch screen control
- Resume Printing - Filament runout and power failure detection, can resume your printer after recovery. Saving your time and reducing waste
- Rapid Heating AC Heat Bed - Can be heated to 120 ℃ in 3 minutes. Support flexible materials. Tempered glass platform makes the prints adhere and release better without warping
- Ultra-Quiet Printing - Replaceable stepper driver and low-decibel working mode make printing quiet, dissipated much less heat.
- Synchronized Dual Z System - Double screw drive, more stable printing with high precision and high-speed movement. Exclusive Z-axis coupler for smoother printing
Artillery Sidewinder X2 3D Printer, High Precision 3D Printing Machine, with Touch Screen Controller and 32-bit Mainboard, Filament Resume Printing After Power Failure, Build Size 11.81x11.81x15.75in
$469.99
in stock
Amazon.com
as of May 23, 2023 6:52 am
Features
- 【Large Color Touch Screen Controller & Auto Leveling】- The high precision laser printer is equipped with a large size color touch screen controller with printing status/function display/parameter setting all transparently presented, which makes operation easy and convenient. What's more, with automatic bed leveling, the printer supports dynamic leveling compensation, frees yuo from complex manual leveling, which proves to be efficient and intelligent.
- 【Fast Heating Bed with Super High Heat Resistance】- The 3D Printer is equipped with glass-ceramic print platform & improved AC heat bed. The build plate surface is so smooth and flat that you can easily remove the printed work. By using the A.C. power, the hot bed can be quickly heated to above 80°C in two minutes. In this way, it ensures the laser printing precision and smoothness.
- 【Filament Runout Detection & Power Loss Recovery】- The Artillery 3D printing machine has the ability to recover from a power failure or brown-out and resume where it left off on the print. And it is equipped with a filament runout detection sensor, which will stop the printer and issue an alarm, when the filament has reached the end, which largely improves its automatic working ability and convenience.
- 【32-bit Mainboard with Silent Printing & Easy to Install】- Thanks to the exclusive 32-bit mainboard and ultra-quiet stepper driver, there is almost no unpleasant noise when printing. Moreover, this upgraded Genius Pro 3D printer is already 98% pre-assembled and only requires a couple of screws installed to hold the main rail assembly to the base. Only several minutes needed can you finish installation.
- 【Perfect Birthday and Christmas Gifts For Him】- Do you still not know what gifts given to your male friends? Come on, please take this luxury and valuable 3D printing machine into consideration. It owns high precision laser printing level and fashionable appearance, satisfying the needs of office and home DIY. Therefore, let's give a surprise to your boyfriend, father and male friends!
Artillery Sidewinder X2 3D Printer, SW-X2 Newest Model 95% Pre-Assembled Ultra-Quiet Rapid Heating Dual Z System Filament Runout Detection Resume Printing 300x300x400mm
$399.00
in stock
Amazon.com
as of May 23, 2023 6:52 am
Features
- Exclusive Ultra-Quiet Stepper Driver - Low decibel even working at fast speeds. With a 300 x 300 x 400 mm build volume. All in one structure, 95% pre-assembly.
- Synchronized Dual Z System - Ensure the X carriage always move parallel to the build plate, Increase printing stability. Intelligent automatic bed leveling, precise testing, efficient.
- Rapid Heating AC Heat Bed - Lattice glass smooth surface, prints smoothly, easy release of printed objects. Fast and stable heating to 110 ℃ in 2 minutes.
- Direct Drive Extruder- 150 mm/s fast print speed, makes high quality print, especially for flexible filament.
- Resume Printing - 3d printer has filament runout detection and recovery. If power is lost, prints can be resumed from the last layer, saving time and money.
Artillery Genius Pro 3D Printer, High Precision 3D Printing Machine, with Touch Screen Controller and 32-bit Mainboard, Auto Leveling, Desktop DIY Tool, Xmas Gifts for Him, Build Size 8.7x8.7x9.8inch
$399.99
in stock
Amazon.com
as of May 23, 2023 6:52 am
Features
- 【Large Color Touch Screen Controller & Auto Leveling】- The high precision laser printer is equipped with a large size color touch screen controller with printing status/function display/parameter setting all transparently presented, which makes operation easy and convenient. What's more, with automatic bed leveling, the printer supports dynamic leveling compensation, frees yuo from complex manual leveling, which proves to be efficient and intelligent.
- 【Fast Heating Bed with Super High Heat Resistance】- The 3D Printer is equipped with glass-ceramic print platform & improved AC heat bed. The build plate surface is so smooth and flat that you can easily remove the printed work. By using the A.C. power, the hot bed can be quickly heated to above 80°C in two minutes. In this way, it ensures the laser printing precision and smoothness.
- 【Filament Runout Detection & Power Loss Recovery】- The Artillery 3D printing machine has the ability to recover from a power failure or brown-out and resume where it left off on the print. And it is equipped with a filament runout detection sensor, which will stop the printer and issue an alarm, when the filament has reached the end, which largely improves its automatic working ability and convenience.
- 【32-bit Mainboard with Silent Printing & Easy to Install】- Thanks to the exclusive 32-bit mainboard and ultra-quiet stepper driver, there is almost no unpleasant noise when printing. Moreover, this upgraded Genius Pro 3D printer is already 98% pre-assembled and only requires a couple of screws installed to hold the main rail assembly to the base. Only several minutes needed can you finish installation.
- 【Perfect Birthday and Christmas Gifts For Him】- Do you still not know what gifts given to your male friends? Come on, please take this luxury and valuable 3D printing machine into consideration. It owns high precision laser printing level and fashionable appearance, satisfying the needs of office and home DIY. Therefore, let's give a surprise to your boyfriend, father and male friends!
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 8.66x8.66x9.84 inch
$189.00 in stock
2 new from $189.00
Free shipping
Amazon.com
as of May 23, 2023 6:52 am
Features
- Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
- Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
- Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110 degree.
- Strict Test: Strict testing for key components before delivery and life-time technical supports available.
AnkerMake M5 3D Printer, FDM 3D Printer, 5X Faster and Extra Intelligent, Cut Print Time by 70%, Smooth 0.1 mm Detail, Error Detection with AI Camera, Auto-Leveling, Integrated Die-Cast Aluminum Alloy
$799.00
in stock
Amazon.com
as of May 23, 2023 6:52 am
Features
- Cut Printing Time by 70%: Get prints fast with PowerBoost. A powerful stepper motor, double-belt driveshaft, and stabilized motion algorithm work together to push out loads of extra power at 5X speed (compared to standard 50mm/sec print speeds).
- Precise 0.1 mm Detail: Achieve precision—even at 5X speed—thanks to the new ultra-direct extruder and integrated die-cast aluminum alloy structure. Never compromise on stable quality even when you're printing at 5X speed. AnkerMake M5 frees yourself from sanding with smoothness in every 0.1 mm thick layer.
- Error Detection System: M5 calculates a printing plan and uses extra processing power and an integrated intelligent camera to stick to it—keeping your model matching your design. Save time and filament with real-time notifications that auto-pause prints when errors are detected, including failing to stick to the print bed, spaghetti messes, or extruder jams.
- Integrated Die-Cast Aluminum Alloy: The integrated die-cast aluminum alloy structure and Z-axis design increase the weight of the base, reducing the center of gravity of the machine. The design makes printing more stable for fast speed and turbo acceleration. This also reduces installation errors for the base, improving printer accuracy.
- Remote Control with Multiple Devices: Whenever the moment of inspiration strikes, you'll be able to access your prints wherever you are. Remote control via the AnkerMake app, AnkerMake Slicer, Alexa.
R QIDI TECHNOLOGY i Fast 3D Printer, Industrial Grade Structure, with Dual Extruder for Fast Printing, Super Large Printing Size 330×250×320mm
$2,499.00
in stock
Amazon.com
as of May 23, 2023 6:52 am
Features
- 【Faster printing】Fully industrial-grade structure, using the second-generation Qidi dual Z-axis structure, all of the original motion structure is upgraded to linear guides, with the high temp extruder, the filament extruding is faster and smoother, the printing accuracy is higher .The printing speed is increased by 20%, it is set to print easily at 100cc per hour.
- 【Freedom in the choice of the filament】 Qidi iFast can print almost all kinds of filaments which suitable for FDM 3D printers on the market, such as PLA ,PLA+ ,ABS ,PETG, NYLON,etc. The iFast 3d printer equipped with a heated chamber, which can be heated to 60°C. The excellent mechanical structure can produce more robust manufacturing-grade parts.
- 【Freedom in manufacturing of the complex parts】 Qidi iFast is equipped with automatic dual extruder, which can automatically adjust the left and right extruder up and down according to the software. With the PVA (water-soluble) support, it is very suitable for printing manufacturing-level parts with complex structures and realizing precision manufacturing.
- 【All metal high temp extruder】 Compared with the normal brass nozzles which on the market, it is more durable and prints smoother. The iFast 3d printer is pre-installed with dual extruder, and the print size is 330×250×320mm.
- 【Excellent user experience, large UI interface】It’s equipped with self-developed QIDI slicing software, two modes can be selected: normal mode and expert mode. The normal mode is suitable for novices, the parameter system has been intelligently set, no other operations are required, it is very simple. Expert mode is suitable for experienced users, who can deeply participate in modifying parameters and personalized printing models.
R QIDI TECHNOLOGY X-CF Pro 3D Printers Industrial Grade,Specially Developed for Printing Carbon Fiber&Nylon with QIDI Fast Slicer, Automatic Leveling,Large Build Volume 11.8x9.8x11.8 Inch
$1,849.00
in stock
Amazon.com
as of May 23, 2023 6:52 am
Features
- 【Design Concept】X-CF PRO is a 3d printer specially designed for printing carbon fiber and nylon filaments.Independent research and development of the latest generation single extruder system, which uses high-temperature alloy material, dual-gear extrusion, can solve the problem of the accuracy is not very accurate or service life is not long when printing carbon fiber. Another set of normal high-speed extruder can easily print PLA, ABS, PETG and other filaments.
- 【Precision Manufacturing Process】QIDI TECH using industrial-grade manufacturing, dual z-axis and industrial guide, can achieve high precision, fast printing. Upgrading the XYZ structure, all use of industrial slides. PEI printing plate, solve printing models warp and other problems.The 3d printer’s structure is developed for the effective and accurate printing of carbon fiber.Meanwile, printing other common filaments, the speed can be increased to 120cc per hour.
- 【New technology upgrade】 A new automatic intelligent leveling mode, taking points up to 20 points to calculate the travel prime. With the new upgraded software, it is more intelligent, especially provide more effective and accurate parameters for printing carbon fiber and nylon filaments, which can be used right out of the box. The main board is made of main core Cortex-M4 and TMC2208 driver chip, matched with 800*480mm 5 inch HD capacitive display.
- 【Professional Filament】In order to better realize carbon fiber, high temperature nylon printing. We have developed these filaments ourselves.QIDI TECH are very grateful to many professional users who have provided us with a lot of valuable information to create this 3D printer dedicated to printing carbon fiber and high-temperature nylon filaments.
- 【QIDI TECH Service】QIDI TECH are committed to making valuable 3d printers. X-CF Pro is suitable for professional users as well as novice users.No assembly,out of the box. It is easy to print according to the operating instructions. The highly praised service of QIDI TECH is the most trustworthy. 2 year warranty(1 year + 1 extra year).
The Video Review of Best artillery 3d printer
Conclusion
When you’re looking for artillery 3d printer, you’ll want to keep a few things in mind. First, decide what you want to use the artillery 3d printer for. Next, check the product reviews with comparision which we have listed as well. Once you’ve decided on artillery 3d printer you want to buy artillery 3d printer, look at the reputation of the manufacturer as well. You can compare prices and quality together before you make your purchase.