In this guide today, we are here with our in-depth review of the best extruder ender 3. There are plenty of choices with multiple websites and therefore difficult to choose the best one. We recommend to read the guide and choose the one that suits your need as we review products based on the various options, features, price, quality and many more . To avoid this dilemma, we recommend to read this guide and review. It gives you insider information on how to choose the best extruder ender 3 for your needs and budget.
This is the ultimate buyers guide extruder ender 3.
Our Top Picks
5
WINSINN Dual Gear Extruder, Ender 3 v2 Upgrade Motor Shaft>20mm, Compatible with Ender 3 Pro CR10...
Check Price On Amazon
Amazon.com
7
Redrex Dual Gear Ender 3 Extruder with Two Washers Metal Drive Feeder Upgrade Kit Compatible with...
Check Price On Amazon
Amazon.com
The Best extruder ender 3
CREALITY Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series
out of stock
Amazon.com
as of July 10, 2024 6:45 am
Features
- Upgrade Material - High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use.
- Stable and Durable-Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original plastic one while working.
- Easy to Install - All you do is unbolt the old original plastic extruder and screw in the new " Red Metal Extruder ", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame.
- Wide Compatibility - Red extruder is suitable for Creality 3d printers accessories: Ender 3, Ender 3 V2, Ender 3 Pro, Ender-3 Max, Ender 5 / 5 Plus / 5 Pro, CR-10S, CR-10, CR 10 mini, CR-10 S5, CR-10 S4, CR 20, CR-20 Pro, CR-X.
- Creality Official Sales: All products are officially sold, genuine and high-quality, please rest assured to buy. All the necessary accessories are included in the package.
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
$9.99 in stock
2 new from $9.99
Free shipping
Amazon.com
as of July 10, 2024 6:45 am
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2，its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
Official Upgraded Ender 3 v2 Ender 3 CR-10 All Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Creality Ender 3 Pro/Ender 5/ CR-10 Series 3D Printer
$9.99
in stock
Amazon.com
as of July 10, 2024 6:45 am
Features
- The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
- Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder.
- Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy.
- Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install.
- 100% brand new and original Creality exturder. If you have any question, please let us know.
Creality Official Ender 3 Direct Drive Upgrade Kit, Comes with 42-40 Stepper Motor Hotend Kit, 1.75mm Direct Drive Extruder Fan and Cables Support Flexible TPU Filament
$29.99
in stock
1 used from $29.69
Free shipping
Amazon.com
as of July 10, 2024 6:45 am
Features
- 100% Creality Official - Creality Ender 3 direct drive upgrade kit, compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments.
- Easy Assemble - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a full extrusion kit. Come with longer connecting cable, tools, accessories and diagram instruction, easy to assemble.
- Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament.
- Strong & Sturdy All Metal Hotend - This direct extruder kit is all metal structure, durable and wear resistant and Integrated structure is convenient for wiring and replacing.
- After-sale Service - There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-year limited and lifetime technical assistance. Please contact us via “ask a question”directly to get the professional assistance.
WINSINN Dual Gear Extruder, Ender 3 v2 Upgrade Motor Shaft>20mm, Compatible with Ender 3 Pro CR10 Series 3D Printer TPU Filament Drive Feed
$15.99
in stock
Amazon.com
as of July 10, 2024 6:45 am
Features
- ✔️【Purchase Note】ONLY for 3D Printers with motor shaft over 20mm, please measure the shaft length before placing order. Due to Creality batches, the original motor shaft of the Ender 3 series printer may not be perfectly fit for our dual gear. You can replace the full size of 42mm high stepper motor if the original motor shaft is too short to Install the gear.
- ✔️【Replacement Kit】Perfect extruder replacement kit for Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 Pro, CR10 S series, Tornado, etc.
- ✔️【Stable And Durable】Upgraded extruder kit made of aluminum alloy material, more stable and durable than the other plastic one while working. Double gear extrusion mechanism, high extrusion force, ensure smooth feeding and gives snappy retractions.
- ✔️【Kindly Reminder】Please calibrate the E-steps from 100 to 139.
- ✔️【Packing List & Warranty】1 x Dual Gear Extruder (This Kit NOT include the stepper motor, motor bracket and instruction manual). 1 Year Warranty. Each product of WINSINN had passed strict QC, If you have any problems when you use the product, just contact us, and we will help you solve it at any time.
Creality Official Ender 3 Aluminum Extruder, 3D Printer Ender 3 Extruder, CR-10 Extruder Upgrade MK8 Drive Feed Bowden Extruders for Ender 3 Series, Creality CR-10 Series, Ender 5 Series
$9.99 in stock
Amazon.com
as of July 10, 2024 6:45 am
Features
- UPGRADE: Creality ender 3 extruder hot end. Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit.
- STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
- EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.
- ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers’ performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
- Trusted Vendor: CHPOWER is a TRUSTED VENDOR. Buy with confidence.
Redrex Dual Gear Ender 3 Extruder with Two Washers Metal Drive Feeder Upgrade Kit Compatible with Creality Ender 3 V2 Pro,Ender 3 Neo Series,CR10 3D Printer TPU Filament Supported(Motor Shaft>20mm)
$11.98
in stock
2 new from $11.98
Free shipping
Amazon.com
as of July 10, 2024 6:45 am
Features
- 【Double Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.
- 【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.
- 【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and feeding issue.
- 【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,CR10 S series 3D printer.ONLY suit for 3d printers with motor shaft over 20mm,please measure the shaft length before placing the order.
- 【Kindly Reminder】:Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use;for 3d printers with filament detector,as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height;for Vyper users,please swap the motor wire sequence to make it turn forward instead of reverse
Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/ Ender 3 V2
$29.99
in stock
Amazon.com
as of July 10, 2024 6:45 am
Features
- Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.
- Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
- Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.
- Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
- Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.
Bigtreetech 3D Printer Upgrade Dual Gear Extruder, MK8 extruder Dual Driver Feed Metal Feeder extruder kit CR-10S Pro/CR-10/ Ender 3 V2/Ender3/Ender 3 pro 1.75mm Filament
$13.79
in stock
Amazon.com
as of July 10, 2024 6:45 am
Features
- 【Upgraded Dual Extruder】Dual gears and dual pneumatic combined extrusion structure, large extrusion force, enhanced feeding intensity, ensuring smooth feeding. The double gear rotation design locks the filament, which is beneficial to improve printing quality and reduce filament slipping, high-speed extrusion or retraction, better pressure to push the filament into the printer, less easy to lose steps, faster printing speed
- 【Compatibility】Double gear mk8 extruder, perfect replacement for 3D printer CR-10/ CR-10S/ CR-10S Pro/ Ender 3 (initial version)/Ender 3 v2/Ender 3 pro/Ender 5/Tornado, etc. 1.75 mm filament (Set only for 3D printers with motor shafts exceeding 20mm, please measure the shaft length before placing an order.)
- 【Stable and Durable】All metal aluminum alloy, high quality double gear extrusion, compared with ordinary plastic drive, this high aluminum metal filament extruder is stable and durable. The idler gear has been upgraded with a brass washer added between the stainless steel gear and the aluminum housing, so the gear does not collide seriously with the housing, which helps reduce stock extruder wear.
- 【Adjustable Spring】The tension of the extrusion spring can be adjusted by tightening the screw, which greatly improves printing accuracy and paper feeding problems. Strong extrusion end spring enhances feeding strength and ensures stable pushing of filaments into the hot end of the printer. Suitable for most types of filament, such as ABS, PLA, TPU, PTEG etc.
- 【Imported Materials】The 3d printer dual extruder material is made of brand new imported aviation aluminum material and processed by CNC imported from Japan. The kit does not include the stepper motor, motor bracket and instructions, we need to make them ourselves. If you need some installation help, there are video introductions online, and you can seek our technical help at any time.
Creality Official Ender 3 Extruder Upgraded and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Bed-Level Spring & Tube Cutter, 4 in 1 Package for Ender-3 Series CR-10 Series
out of stock
Amazon.com
as of July 10, 2024 6:45 am
Features
- ✔️【Quality Assurance】Creality 100% official aluminum extruder is lightweight and strong, ensuring a more even feed rate over time as well as resisting wear. Removed pneumatic joint so as to increase gear density, it makes loading the filament easier and smoother. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
- ✔️【Original Capricorn PTFE Tube】Capricorn PTFE is well regarded as the highest quality PTFE tubing in all 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hot end.
- ✔️【Great Value Spare Parts】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They will allow you to print at a higher speed without worrying about any wobble. One PTFE cutter with an extra sharp razor is also included to ensure that the tube is cut flat on both sides.
- ✔️【Easy To Install】DIY kit and you need to assemble by yourself. The full installation kit for the extruder is included. Referrring to our 7th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine. (NOTE: The springs are around 25mm long, which is longer than Creality ender 3/ender 3 pro/ender 3 V2 springs. You may use a tool to cut it to be shorter if you need it or adjust the hot bed to be higher to fit the springs.)
- ✔️【Creality 3D Store】More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via “ask a question” find us directly cause our customer service will respond to you within 24 hours no matter what question.
The Video Review of Best extruder ender 3
Conclusion
Our best overall extruder ender 3, the Perception and the reviews helps assist to choose you the product better. We hope our reviews buyer guide of these extruder ender 3 will help you pick the perfect extruder ender 3 for you and your buying decision making.