In this guide today, we are here with our in-depth review of the best sla printers. There are plenty of choices with multiple websites and therefore difficult to choose the best one. We recommend to read the guide and choose the one that suits your need as we review products based on the various options, features, price, quality and many more . To avoid this dilemma, we recommend to read this guide and review. It gives you insider information on how to choose the best sla printers for your needs and budget.
This is the ultimate buyers guide sla printers.
The Best sla printers
7
Creality HALOT-ONE Resin 3D Printer with High Precise Integral Light Source, CL-60 SLA 3D Printer...
Check Price On Amazon
Amazon.com
The Best sla printers
ANYCUBIC Photon Mono 4K 3D Printer, 6.23'' Monochrome Screen Upgraded LCD SLA UV Resin 3D Printers with Fast & Precise Printing and Large Printing Size 5.20''X3.14''X6.50''
out of stock
Amazon.com
as of September 10, 2025 7:10 pm
Features
- [High-speed 3D Resin Printer]: ANYCUBIC Photon MONO 4K 3D printer is upgraded with 4k monochrome LCD with 35um XY pixels, is one of the greatest accuracies in 3D printing field. The 7% high light transmittance could absorb higher curing UV power for faster printing and curing speed, the single-layer exposure and curing time is as low as 1.5s. The printing speed can reach up to maximum 50mm/h. 2.5X Faster than original 2k printer.
- [4K High Resolution & Higher Accuracy]: This newly high resolution 3840x2400 MONO 4K resin printer has smaller pixel and sawtooth texture, to print more delicate and smooth surface; and MONO 4K uses a high contrast ratio more than 400:1 monochrome screen, which makes the image in the exposure areas more accurate and produce highly-detailed prints with clearer and sharper edges and corners, thus improving the quality and success rate of printing, also greatly reducing the residue in resin vat.
- [6.23" Large Screen & Larger Print Size]: The Photon Mono 4K is equipped with a decent 6.23" screen, which is 29% larger than the Anycubic Photon’s 5.5” in screen area. It can also print up to 6.5x5.2x3.1in at a time, which offers your creations more possibilities.
- [Adjustable Power & Universal Compatibility]: With 30%-100% light power regulation, Anycubic Photon Mono 4K supports not only ordinary 405nm UV resins, but also special resins, making it compatible to more materials and environments. In addition, adjusting the light power appropriately can extend the lifespan of both the screen and light significantly.
- [Improved LCD Protection]: Compared to all other mono series LCD printers in the market, for many LCD screen problems, Our MONO 4K screen printer has added a replaceable anti-scratch film between the protective film and the screen itself to improve the protection for screen, and comes with one-piece extra protective film for replacement.
ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing (Grey, 1kg)
$21.99
in stock
Amazon.com
as of September 10, 2025 7:10 pm
Features
- Low Shrinkage & High Precision: ANYCUBIC UV resin prints the models with low shrinkage during the photocuring process, which ensures the high precision and smooth surface.
- Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.
- Rigidity & Toughness: ANYCUBIC LCD resin has a good combination of hardness and toughness, which brings easy removal of the model and delivers accurate printing details.
- Multiple Colors & Universal Compatibility: ANYCUBIC standard resins are compatible with all DLP/LCD 3D printers, works best with ANYCUBIC LCD 3D printers, multiple colors for your choice. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.
- Safe & Secure Package: ANYCUBIC UV-Curing resin bottle is packed well in plastics bubble wrap, the cap is completely intact, surrounded by a tight-fitting air bag. No worries for leakage.
ANYCUBIC Wash and Cure Station, Newest Upgraded 2 in 1 Wash and Cure 2.0 Machine for Mars Anycubic Photon Mono 4K 2 LCD SLA DLP 3D Printer Models UV Rotary Curing Resin Box, Wash Size 4.72x2.91x6.49
$129.99
in stock
1 used from $119.98
Free shipping
Amazon.com
as of September 10, 2025 7:10 pm
Features
- 【Larger Size for Upgraded Capacity】Compared to Anycubic Wash & Cure 2, Wash and Cure 3 has an impressive 42% increase in cleaning basket capacity, this makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less. The volume of the cleaning bucket has also increased to 4L, meeting the cleaning needs of larger and more 3d models
- 【Gooseneck light design】The "Innovative Flexicure Gooseneck Light Design" of ANYCUBIC increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments
- 【Dual-layer Design, IPA Saving】The double-layered PP material cleaning basket is designed to support cleaning with defferent platforms. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design also maximizes the efficiency of IPA usage
- 【Enhanced Curing Power】By utilizing a new bead arrangement and lens light source, Wash & Cure 3.0 offers a 20%* improvement in curing uniformity over the previous generation 2.0. This results in a more thorough and comprehensive curing of the entire model
- 【Quiet and Simple】Cleaning and curing dual modes, easily selected with one click; Gooseneck light curing mode can be easily toggled on and off with one click. Adjustable from 1 to 30 minutes at will. After the closed structure design and software optimization, machine can effectively reduce the cleaning, curing noise interference, to create a quieter and more comfortable working environment
ANYCUBIC Resin 3D Printer, Photon M3 Max SLA LCD UV Resin Printers with 13.6'' 7K Mono Screen, Smart Resin Filler, Large 3D Printing Size 11.7'' x 6.5'' x 11.81''
out of stock
Amazon.com
as of September 10, 2025 7:10 pm
Features
- Extraordinary Printing Size, Anycubic Photon M3 Max with a 11.7'' x 6.5'' x 11.81'' building size, which is the largest one of Anycubic resin 3d printer so far. The practical printing volume can meet the printing needs of your large-scale models, while achieving batch printing and improving production efficiency.
- Well-defined Print Details. comes with a 13.6’’ 7K HD Mono Screen, Photon m3 max achieves the large size printing while maintaining the precision of the model. Coupled with the Z-axis rail of the ball screw, and the high contrast ratio of 450:1, it can better reproduce the details, making your model more different.
- Fast Printing Speed. The ANYCUBIC Photon M3 max mono screen is composed of 84 LED lights neatly arranged, providing a powerful matrix light source that shortens the printing time of each layer to 3 seconds, and can achieve fast printing of up to 60mm/h.
- Automatic Resin Feeding, Anycubic Auto Resin Filler can intelligently replenish resin and stop replenishing, reducing printing failures caused by insufficient resin, making your time more free.
- Upgraded Function. Photon M3 Max adopts laser engraving 3D printing platform, which has better platform adhesion than brushed platform and improves success rate. At the same time, anti-scratch film can reduce the screen damage caused by resin leakage and save the high cost of replacing the screen.
Monoprice Mini SLA LCD Resin 3D Printer (Updated Version) Build Area 118 x 65 x 110 mm, High Resolution, Auto Leveling, Wi-Fi Web UI, 2K LCD Curing Screen
out of stock
Amazon.com
as of September 10, 2025 7:10 pm
Features
- Firmware update available: please search (35435) on the Monoprice website & refer to the supported files
- Auto leveled build plate: part of the difficulty of resin prints is making sure that the build plate is level with the vat
- Simple Wi-Fi web UI: Slice, print, and manage model files without the need for a separate software program using the convenient, built-in web UI
- Model number: 135435
Tresbro UV Resin Curing Light for SLA/DLP/LCD 3D Printer Solidify Photosensitive Resin 405nm UV Resin with 20W Output Affect, DIY Curing Enclosue, Come with a Solar Turntable 360°Rotating Stand
out of stock
Amazon.com
as of September 10, 2025 7:10 pm
Features
- 【More Safe to Use】Tresbro 3D printer uv resin curing light with the UL certified waterproof power supply is more safety and reliable than other cheap uv resin light. The high brightness chip and led beads can reduce light decay efficiently, and the aluminum casings makes sure no rusty and longlife use.
- 【Energy-saving and Environmental Friendly 】Our 20W uv resin curing light uses 20 high-power 405nm UV Led beads to cure your uv resin prints quckily. This 20W uv light has 200W output effect, the power sonsumption is only one-tenth of the traditional UV lamp. It has no contains mercury. Efficient, energy saving and very environmentally friendly.
- 【360°Rotating Solar Power Turntable Included】 Tresbro UV resin curing light comes with a 360° solar turntable. With this turntable, you will never need to worry the uneven curing of your beloved prints. What's more, the solar turntable can be used with batteries or the UV light, which is very convenient.
- 【Fast Curing】Within 5 cm to the light, the resin can be cure within 10-15 seconds, but thicker parts need more time. This uv resin curing lamp will greatly reduce your time in curing.
- 【Friendly Reminder】The uv light for resin can be use to DIY curing enclosue or use in handheld way. Due to strong UV light output, please use eye protection when using this light.
Creality HALOT-ONE Resin 3D Printer with High Precise Integral Light Source, CL-60 SLA 3D Printer with 2K Mono LCD Screen WiFi Function Dual Cooling & Filtering Systems Print Size 127x80x160mm
$159.00
out of stock
3 new from $159.00
Free shipping
Amazon.com
as of September 10, 2025 7:10 pm
Features
- Integral light source: Compared with the directional matrix light source, the integral light source that HALOT-ONE adopts has the absolute advantages of 20% higher precision, 15% higher uniformity and 99% higher saturation, which perfectly solves the problems such as uneven light curing, overexposure as well as corrugated layer on the printed models.
- Powerful kernel. HALOT-ONE is equipped with a new generation of self-developed motherboard, with powerful computing capability and image processing ability.
- Efficient and easy slicing software. HALOT-ONE possesses a self-developed slicing software whose interface is concise, simple and convenient to operate.
- 5.96-inch monochrome LCD. HALOT-ONE is equipped with the 6.08-inch monochrome 2K LCD whose resolution is up to 1620*2560, with high light transmission and low damage rate, and the normal service life is up to 2000h.
- Efficient cooling and filtration system. HALOT-ONE is equipped with the customized cooling system composed of cooling block and cooling fan for quick heat dissipation and air filtration system of activated carbon to reduce the odor emission.
6 Pieces FEP Film 200 x 140 x 0.15 mm LCD SLA Resin Film Sheet Compatible with UV DLP 3D Printers, with 6 Pieces Replacement Plastic Spatulas Scrapers (3 Yellow, 3 Black)
out of stock
Amazon.com
as of September 10, 2025 7:10 pm
Features
| Part Number | Mudder-Spatulas -01 |
| Model | Mudder-Spatulas -01 |
8 Pieces FEP Film Sheet 140 x 200 mm High Transmittance Strength, 0.1 mm Thickness Compatible with UV DLP 3D Printers, LCD SLA Resin, with 2 Pieces Replacement Plastic Spatulas
out of stock
Amazon.com
as of September 10, 2025 7:10 pm
Features
- What you receive: package comes with 8 pieces 200 x 140 x 0.1 mm FEP films, and 2 pieces replacement plastic spatulas, enough quantity to meet your replaceable needs, replacing these sheets regularly is recommended to reduce print failures and for nice print quality
- Quality material: FEP film sheet is heat resistant to high temperature (204 °C), with features of non-stick, smooth and non-scratch surface, UV stable, durable to use for a long time
- Compatibility: 3D resin printer FEP films are compatible with UV DLP 3D printer, Monoprice Mini Deluxe SLA, ELEGOO Mars LCD and other same size 3D printer frame
- High transmittance strength: the FEP film sheet is highly UV resistant and clear, able to withstand any high temperature from sustained typical operation for UV SLA 3D printers, allows for over 95% of UV light to pass through unaffected
- With plastic spatulas: regularly replacing the plastic spatula can help avoid destroying the FEP sheet once it is installed on the bottom of the resin basin, because the spatulas could scratch or kink the FEP film which will result in more failed prints and lower print quality once deformed or broken; Please do not use metal spatulas or spades on this film
Sovol 3D Upgraded Platform 2 Pack, Resin Magnetic Flexible Steel Plate Flex Bed Fits for Mars 2/ Mars 2 Pro Creality LD-002H Nova3D Bene 4 SLA 3D Printer 140 x 84mm
out of stock
Amazon.com
as of September 10, 2025 7:10 pm
Features
- Spring steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print.
- ‼Please adjust the z limit switch after installation. It should be 2.7mm higher. That means the printing height will be reduced about 2.7mm. You can print a spacer to compensate the difference. If you do not receive instrucstions coming with the product, please refer to the last 2 pictures we listed on the product webpage which contains instructions in details. Any other questions or issues about the product please feel free to contact us.
- The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The two easy lift tabs(handles) make it easier to remove the steel plate from the magnetic base.
- !!! Please clean up your build plate with alcohol to make sure there is no any resin or dust left on the surface. The build plate must be clean and dry. And you need to stick and compact the magnetic base on build plate to make sure no any bubbles. Otherwise the magnetic base would peel off. Please wait for 72 hours after installation and before printing. Tips: You can use hair dryer blow the magnetic base evenly with hot wind for 5-10 mins after installation to increase the adhesion.
- The spare steel plate can achieve continuous printing, restart printing before you start cleaning the first, save your time.
The Video Review of Best sla printers
Final thoughts
When you’re looking for sla printers, you’ll want to keep a few things in mind. First, decide what you want to use the sla printers for. Next, check the product reviews with comparision which we have listed as well. Once you’ve decided on sla printers you want to buy sla printers, look at the reputation of the manufacturer as well. You can compare prices and quality together before you make your purchase.