Best 10 clutch forks Our Picks

Features

• Brand New Southwest Speed and Ram Clutch Aluminum Bellhousing and 11" Clutch Kit for use with Manual Transmissions. The kit includes a replica GM 3899621 Bellhousing, Flywheel Inspection Cover, Clutch Fork with Ball Retaining Spring, Throwout Bearing, Clutch Fork Boot, Clutch Fork Pivot, Flywheel, Clutch Disc, Pressure Plate, and hardware (Part # 650-39755, 901180) > Fits transmissions with 1 5/32"-26 spline input shafts and Chevy engines with a 2 piece rear main seal
• The Southwest Speed 11" Performance Cast Aluminum Bellhousing is a reproduction of the original 3899621 bellhousing used on GM models with Big Block and Small Block engines > This performance aluminum bellhousing does not have the GM Part # 3899621 casting number but will look, fit, and perform just like original > If you are doing a restoration of an early muscle car, or just want the correct bellhousing to finish that rod project, this bellhousing is the perfect part
• Fits: > 1964-1988 Chevy Chevelle, Malibu, Monte Carlo* > 1959-1987 Chevy El Camino* > 1959-1988 Chevy Impala, Caprice, Bel Air, Biscayne, Brookwood, Kingswood, Nomad, Sedan Delivery* > 1963-1981 Chevy Corvette* > 1967-1981 Chevy Camaro* > 1968-1974 Chevy II, Nova* > *With Manual Transmissions and 168 tooth Flywheel > The bellhousing was used with 4 speed transmissions in 66-72 Chevelle, 66-81 Corvette, 67-72 Camaro, 68-72 Nova, and 64-81 Impala
• This new Chevy high performance 11" aluminum bellhousing was issued on Camaros, Chevelles, Impalas, Corvettes and Nova’s with big block 396, 427, and 454 engines, as well as Yenko, Copo, and ZL1 and also small blocks like 302, 327, 350 and 400 with the 168 tooth, 14" flywheels and 11" clutches, including Z28, Yenko, and Deuce models > Will accept your original Muncie or Saginaw Manual Transmission with a 4.675" O.D. bearing retainer > Will even work with the Tremec 5 and 6 Speed Transmissions
• You can use one of the new bolt-in Classic Car Conversion Transmissions and still use all of the Stock 4 Speed Pedals and Rods with this bellhousing > Will not work on 1962-1967 Chevy II and Chevy Nova models as the size of the transmission tunnel is too narrow > Will not work on Monza or Vega as they both used a cable operated 10.5" clutch with the pivot on the other side > The clutch fork was also angled about 45 degrees not straight across