Finding a non slip cutting board feet that suits your need and does its job well can be challenging. Overall, our tester reviews these non slip cutting board feet with giving ratings and marks for its durability, ease of setup and use. Also the non slip cutting board feet price will be fairly matched the product’s performance, plus with the attractive and sturdy design etc that comes with the product. We conducted hands-on testing for non slip cutting board feet and have the details guide and list provided below.
This is the ultimate buyers guide non slip cutting board feet.
The Best non slip cutting board feet
The Best non slip cutting board feet
Rubber Cutting Board Feet with Stainless Washer and Screws, 1 inch Black Round Rubber Feet, Non Slip Bumper Pads for Furniture, Electronics & Application,20 Pack
$12.99
in stock
Amazon.com
as of December 23, 2023 10:20 pm
Features
- These rubber feet can make the cutting board hover just off the table and provide enough separation that pick the board up easier, so the cutting board won’t suck on a wet table.
- RoHS Compliant rubber is hard but elastic, the built-in washer can keep them from tearing out as you tighten the screws. Both the washers and the screws are stainless steel. Easy to install.
- These rubber pads provide a good grip, shock absorption, and cracking resistance. No Marking ,No Noise.
- Best for use on cutting board, barbecue board, cheese board, also you can install them to the bottom of cabinet doors, glass table tops , electronics and other furniture feet .
- The cutting board rubber feet Size: 0.354" Tall x0.905" Top Width x 1 " Bottom Width (9mm*23mm*25mm). each set include 20 rubber feet and 20 #10 Stainless Steel screws;
Rubber Feet for Cutting Board with Stainless Screws, 12 Pieces Non Slip Rubber Bumper Feet for Electronics 13/16" W x 3/8" H
$11.99 in stock
Amazon.com
as of December 23, 2023 10:20 pm
Features
- Each pack including 12 round rubber feet and 12 matching wood screws.
- Perfect for cutting board feet and other wood craft projects.
- 3/8" Tall x 13/16" Top Width x 11/16" Bottom Width, Center hole 5/32" (fits #8 screws).
- Made from quality thermoplastic rubber, soft, anti-slip, anti-corrosion. Protect your counertop, cabinet from scratching, also provide good shock absorption.
- Built-in a stainless steel washer for each rubber feet, to increase stability and durability. Screw on rubber feet, easy to install.
120 Pieces Soft Cutting Board Rubber Feet with 304 Stainless Steel Screws, 0.31 x 0.59 (HD), Not Slip, Non Marking, Anti-Skid, Fine Grips for Furniture, Electronics and Appliances
$15.96
in stock
Amazon.com
as of December 23, 2023 10:20 pm
Features
- ★Function: Help prevent that sofa moving too easy and interrupt you rest on it, or chair sliding too fast and scratching floor, enough quantities rubber furniture pads will keep in place all furniture and protect floors in your lovely home from scratches.
- ★Every set includes 120 small round rubber bumpers and 130 304 Stainless steel screws(D15*12*H8mm).
- ★Rrubber bumpers complement cutting boards, cabinet doors and glass table tops.
- ★Each round rubber feet is equipped with a self-tapping screw for mounting, compared to the self-adhesive round rubber feet, our products enable the round rubber feet to be installed more sturdy and great protection for your furniture and floor.
- ★Each round rubber feet is equipped with a embedded stainless steel ring, compared with other round rubber feet, our products last longer and work better.
Alamic Round Rubber Feet Cutting Board Feet Non Slip Bumper with Stainless Steel Screws 0.315" H x 0.59" W - 50 Pack
$9.99
in stock
Amazon.com
as of December 23, 2023 10:20 pm
Features
- Alamic small round rubber feet is perfect for cutting boards, cheese plate, cabinet doors and other items that require rubber feet.
- Alamic cutting board feet base diameter: 0.59"/15mm; Top diameter: 0.47"/12mm; Height: 0.315"/8mm; Hole diameter: 0.12"/3mm. Includes 50 stainless steel screws.
- Non Marking - High Quality - Thermal Plastic Rubber / Durometer 87.
- The built-in washers keep the little feet from tearing out as you tighten the screws.
- RoHS Compliant.
Set of 16 Cutting Board Feet, Non Slip Silicone Pads Black Non Adhesive, Glue Free
$11.99
in stock
Amazon.com
as of December 23, 2023 10:20 pm
Features
- Sufficient Quantity: the package comes with 16 pieces of triangular cutting board feet in classic black color, which are enough to satisfy your use and replacement demands, practical tools to bring convenience during your chopping process
- Trustworthy to Use: the no slide cutting board pads are made of silicone material, which are safe, reliable, rated for food contact, soft, resilient, easy to clean, and not easy to break, wear, offering you long time application
- Easy to Use: no other auxiliary items are needed, you can just place the slip resistant pads for chopping board under the cutting board to stop your cutting board from sliding around, easily for your operating
- Thoughtful Design: with triangular design, you can apply these cutting board gripper feet 4 pieces at a time, which will provide protection to the table and other countertop, and will not make the cutting board slide
- Proper Size for Your Cutting Boards: the anti skid pads for cutting board measure approx. 5.08 x 2.54 x 0.635 cm/ 2 x 1 x 0.25 inches, the appropriate size makes they are suitable for most chopping board in your kitchen
Woodkay 60 PCS Rubber Feet for Cutting Board, 0.59’’ x 0.31’’– PVC Cutting Board Feet Non Slip with 304 Rust-Proof Stainless Steel Screws & Washers- Ideal for Kitchen Appliances & Multiple Furniture
$8.79 in stock
3 new from $8.79
Free shipping
Amazon.com
as of December 23, 2023 10:20 pm
Features
- 【SOFT AND NON SLIP】: Don’t worry about furniture slipping or leaving black marks; our rubber feet are soft & strong enough during installation. You can use them under multiple pieces of furniture without worrying about damage or marks
- 【PREMIUM QUALITY】: Our cutting board feet for boards are made with premium quality PVC material, while the screws and washers are made of 304 stainless steel, which makes them rustproof, durable & long-lasting
- 【APPROPRIATE SIZE】: Our rubber feet bumpers are perfect for your needs. They will easily fit onto your board with a top width of 0.47 inches bottom width 0.59” and a height of 0.31 inches. The screws also have a perfect size, measuring 0.25" in width and 0.44" in height
- 【MULTIPLE USES】: Looking for multifunctional hardware feet? Our non-slip small rubber feet can be used at any temperature condition under cutting boards, dining chairs, and other light furniture to protect them from moisture and humidity
- 【CUSTOMER SATISFACTION】: No need to worry about missing silicon feet for cutting board, screw, and washer. You can buy our rubber feet bumpers with complete confidence. If you are dissatisfied, we will send you a replacement
Sonder Los Angeles, Made in USA, Large Thick End Grain Walnut Wood Cutting Board with Non-Slip Feet, Juice Groove, Sorting Compartments for Kitchen 17x13x1.5 in (Gift Box Included)
$159.95
in stock
1 used from $130.98
Free shipping
Amazon.com
as of December 23, 2023 10:20 pm
Features
- END GRAIN DURABILITY – Alfred is an end grain constructed board. This construction type is known to be extremely durable, to withstand heavy duty chopping, and is highly desired for its 'self-healing' properties. Each knife cut goes between the wood fibers, rather than cutting through them. These fibers close back up after the knife exits, keeping your knife's edge sharper for longer. Finished safely. Free of BPA, phthalates, and formaldehyde.
- DEEP JUICE GROOVE – No more messy countertops from liquids running off your board. Our juice groove holds up to 3.5 oz of liquid to prevent water, juice, and grease from overflowing during meal prep and serving. Perfect for cutting up fruits, vegetables, and carving meats like brisket, roast, prime rib, etc.
- VERSATILE SORTING COMPARTMENTS – No need to off-load your diced onions, garlic, etc. onto extra dishes. Simplify meal prep as you dice and slide into the compartments to clear your workspace and continue chopping. Try using the compartments for serving nuts, fruit, olives, and more as part of a charcuterie board.
- RUBBER FEET FOR STABILITY – Our 1.5 inch thick butcher block style board comes with removable rubber feet on both sides for extra stability while chopping and slicing and the integrated finger grips make it easy to lift, flip or transfer from kitchen to table.
- PROUDLY MADE IN AMERICA – Crafted right here in the USA with our selection of sustainably sourced Black Walnut. When cared for correctly, with proper cleaning (hand wash only) and oiling every 3 weeks, this board will outlast most items in your kitchen.
20 Small Clear Round Rubber Feet W/SCREWS- .250 H X .671 D - Made in USA - Food Safe Cutting Boards Electronics Crafts #
$12.99
in stock
Amazon.com
as of December 23, 2023 10:20 pm
Features
- .250" Tall x .671" Top Width x .583" Bottom Width - Made in USA / Food Safe
- Includes 20 Stainless steel #6 x 1/2 inch screws
- Non Marking High Quality Polyethylene Vinyl / Durometer 87
- Removable Metal Insert for Extra Strength / Center Hole - Recess Dia 336" / Recess Depth .125"
- Made in the U.S.A. / RoHS & REACH Compliant / 3TG, BPA & Conflict Mineral Free
azamine End Grain Cutting Board, Large Walnut/Rubber Wood Cutting Board, with Non-Slip Feet, Juice Groove, Extra Large 20*14*6/5 inch Cutting Block for Kitchen
out of stock
Amazon.com
as of December 23, 2023 10:20 pm
Features
- Walnut Wood Cutting Board: upscale black walnut is one of the most popular options for cutting boards. It has low water absorption and is not easy to be warped, which is a good sanitary option. Black walnut is more resistant to cut than other wood and has self-healing properties so it does not get gouged easily and keeps your board and knives lasting long.
- Durable and Knife-Friendly: Our wood cutting board is an end-grain chopping board that is famous as more firm and long-lived, and resistant to nicks and gouges. Quality walnut wood and end-grain construction keep knives sharp longer and need to sharpen rarer.
- Large Cutting Board: The thick butcher block cutting board is more large and thick, 20*14*6/5 inches, and can cut larger areas and put more food on it. Perfect for carving meats like brisket, roast, prime rib, and cutting up fruits, vegetables, etc.
- Distinctive-looking: Walnut and rubberwood create the exquisite checkerboard pattern full of exceptional character, mixing elegant and rustic. Unique colors, and textures, add extra elegance and beauty to your kitchen and life. Every wood is selected carefully. Every wood grain is unique.
- Juice Groove: Deep juice groove can prevent water, juice, and grease from overflowing during meal prep. The chopping block is reversible and can also be a display tray.
Soft Rubber Feet for Cutting Board with Stainless Screws, Cutting Board Feet Non Slip Rubber Feet for Electronics, Small Rubber Bumpers for Furniture, Made in USA, 0.67" W x 0.25" H (12 Pack)
$13.95
in stock
Amazon.com
as of December 23, 2023 10:20 pm
Features
- Cut with confidence: Stabilize your cutting boards with our non slip rubber cutting board feet! Each set includes 12 rubber bumper pads paired with 12 stainless steel screws and steel inserts.
- Made in USA: Our rubber feet bumpers are made from BPA Free rubber. Whether you use them as butcher block feet or charcuterie board feet, our rubber appliance feet are a great addition to any kitchen.
- Protect your kitchen countertops: Wood feet for cutting board leave scratches and adhesive rubber feet fall off! Our screw on rubber feet for cutting boards keep your boards secured and stabilized.
- Protect your hardwood floors: Install our non skid rubber feet for furniture legs on stools, screw on chair feet, or even add them under nightstand cabinet feet and start enjoying scratch-free floors!
- Small soft rubber furniture feet: Our rubber pads for cutting board measure 0.67" wide, 0.25" tall, 0.12" center hole (fits #6 screws). Available in black, clear, and white rubber feet.
The Video Review of Best non slip cutting board feet
Final thoughts
When you’re looking for non slip cutting board feet, you’ll want to keep a few things in mind. First, decide what you want to use the non slip cutting board feet for. Next, check the product reviews with comparision which we have listed as well. Once you’ve decided on non slip cutting board feet you want to buy non slip cutting board feet, look at the reputation of the manufacturer as well. You can compare prices and quality together before you make your purchase.