Best 6 Welding Respirators

Getting a respirator is mandatory when you are doing welding. You can be a professional one or a hobbyist.  You can try to do the welding without it but then you will feel terrible by inhaling the smoke.

It will cause you coughing and sneezing, also it may choke you temporarily. Getting a good respirator is thus, necessary. Not only fumes, there are also fine particles and different other pollutants which causes the breathing problem.

The fume that emerges when the welding takes place is quite hazardous and to be safe while doing welding you must have proper gears. There can be short term irritation to eyes and even to the skin of the welder. It can later cause dizziness as well as nausea. Exposure to the fume for a long period of time can be severe and it can lead to lung cancer.

Best Welding Respirators

We are here referring to best 6 good respirators which are budget friendly and come with all the necessary features. You would also need good welding cart.

1. 3M Rugged Comfort Quick Latch Half Earpiece Respirator

The 3M respirator is one of the best that we have mentioned in the list. The material is resilient silicone which makes it a product with firm grip. There will be no issue with fatigue or any uncomfortable feeling. The material offers good seal. The quick latch mechanism enables the easy removal of the respirator.

Also you can pull the equipment back without removing the strap. There is cool flow valve which enables the flow of cool air within the respirator. There will be no heat or moisture trapped inside this respirator so no issue of fogging up of the glass. Durability and stability is two prior feature of this respirator. There is exhalation valve which controls the movement of exhaled breathe so the moisture is flown to downward direction.

The half face design allows you to wear any low profile welding helmet under this. Some half mask designed respirator causes obstruction to the welder’s view but not this one.

The low profile design allows you to see through properly. As there is bayonet connection, the entire 3M bayonet styled cartridges will be compatible with it. The head harness assembly is adjustable with the polyester or spandex straps. The head cradle comes with three sizes so it will fit any and everyone. It provides ample protection from the fume that emits during welding.

Pros:

• Comfortable
• Easy removal
• Half mask design
• Ventilation of heat

Cons:

• Little more expensive

2. Breath Buddy Respirator Mask–

The respirator mask which offers protection to the professional welders of the world is Breath Buddy. The standard of this product is high and it will offer smooth breathing while not hampering your lungs with toxic fumes. The protection it offers is world class. You can enjoy 99.95% filtering through which the pollen, asbestos particles, lead paint or even the dust will be screened. The permissible exposure level is maintained in this respirator so this can be used in workshops.

The package combines a reusable mask, a pair of glasses and a powerful filter. As this mask can be used over and again it becomes eco friendly and does not increase waste. The high quality glass pair comes with P3 filters.

It has passed the CE standard and there is cool air valve within it. You can breathe fresh air through these valves. The straps allow you to fit the mask with adjustability. These are much comfortable for the users. You can put it on or remove it without touching the neck strap. It smoothly filters the air and serves you with fresh breathing.

Pros:

• Most efficient filter
• Valve to pass cool air
• Comfortably wear or remove

Cons:

• Pricey

3. Miller Electric Half Mask Respirator –

Mille is one of the famous brands for supplying products for welding industry. There is lots of protective equipment which are built for the professionals. The high quality products it makes are all loved by the customers. This half mask respirator is another addition to that list. The mask does not cover the full face as mentioned in the name but it protects the area of nose to chin. You must be wearing the right sized mask so the protection you get is full. There are varieties of sizes available for this mask so you can get the right sized one easily.

The large surface area of this mask prevents the air flow which contains the harmful particles of allergens and fumes. The snug design is a good fit and yet there will be space for breathing comfortably. If you are worried about the bad odor that emits during welding, you can be assured that the mask will not let the odor pass to your nostrils, only fresh cool air will be breathed. There are adjustable straps which makes it fit to every user’s head. This one weighs 1.6 ounce which is not too heavy to wear.

Pros:

• Proper protection
• Different sizes available
• Spacious for breathing

Cons:

• Expensive filter

4. GVS Ellipse P100 Half Mask Respirator –

This is another great choice for the professional welders as it offers full protection from the smelly fumes and the toxic gases. The form factor of this respirator is great as it makes the respirator fit under any mask. It is comfortable to wear and does not suffocate you while it lets you breathe easily.

It weighs 6.4 ounce but will not make you feel heavy on face. The properties it comes with are all much user friendly. There is multi position strap which makes it more adjustable to many different sized heads. The price of this product is quite budget-friendly and on this point it differs to the other respirators of this list. This product is one time buy and you can use it for months to come.

Along with offering best value for your money, this half mask respirator offers clear visibility through the free upper half of the mask. It will let you see the nuanced concerns of the project that you will be welding on. However, it is better not be used for daily purpose, so the hobbyists will find it more comfortable and suitable product.

Pros:

• Lightweight
• Multi position strap to fit all heads
• Pocket friendly

Cons:

• Not long lasting

5. PD-100 Full Face Organic Vapor welding Respirator –

This is the full mask respirator which offers protection of nose and mouth along with eyes. When you are working on a project where there will be particles flying all around, it will get you covered. No sparks can fly to your eyes if you are wearing this respirator mask.

The lightweight, eco friendly design of this mask makes it a much comfortable product to wear even on the hot and humid days. You will not feel suffocated while wearing it, but there will be no compromise with the protection level. The fog will never be gathered on the eye area as the hot air will be circulated through the space and not create the stuffiness. This is called “never fog circulation technology” which is used in this respirator mask. As there will be no fog gathered, you will always be able to see clearly through the mask. The excess moisture or heat is always removed from within the mask and thus the breathing will be easy and on cool air.

There are easily adjustable straps that make it fit to everyone’s head. It often happens that the full mask respirators feel suffocating or choking due to the extra coverage it provides. But with this respirator it is not the same. Even you can talk clearly through this mask as there will be no muffling of sounds. The speaking diaphragm makes the sound come through it most legible.  No need to remove the mask when you feel like talking to others. The face shield that it comes with, takes in the extensive shock as well and your face does not get hurt easily.

Pros:

• Full face cover
• Eye protection
• Comfortable
• Clear talking through it

Cons:

• Filter pops out

6.Combo Miller ELECTRIC ML00895 Half Mask Respirator

Easy breathing is enabled during the time of welding with this half mask from Miller. This one is designed in a compact way and the material is much thin. It fits under the helmets quite easily. You will not feel clunky or obstructive while using the helmet over this mask. There is Ellipse HEPA air filter fitted in this mask which offers only cool and comfortable breathing. Harmful fumes as well as particles will be kept away from your nostril and from your lungs in this process.

As an effect of this mask, you will not face the closed nostrils after a whole day of welding. The filtration of airborne particles is quite effective and you will get 99.90% effect of this filtration process. The glasses also fit well with the respirator and the lens never gets fogged. The circulation of cool air inside this respirator makes it possible. Also you can replace the filter easily as the filters are available pretty much everywhere.

Pros:

• Fits all welding hoods
• Protects from airborne particles
• No fogging
• Efficient filtration

Cons:

• Pricey filters

Conclusion:

While going to buy a respirator mask, always look for the lightweight and durable options. The filter must be working efficiently so your lungs and nose gets rest after a long and tiring day of welding. If you are a hobbyist, you can go for the cheaper options, but if you are working as a professional welding person, then look for the durable respiration masks which will offer you protection for the long term.