Top 10 dk2 stump grinder In 2022

Features

• 【BELT DRIVEN GEAR BOX AND DRIVE AXLE SYSTEM】: The in-feed system on the WC-8M utilizes a belt-driven oil bath heavy-duty gearbox that increases torque and transfers power to the upper feed roller through an extreme-duty drive axle. For long life. the drive axle is machined splined (similar to the PTO spline of your tractor), and the U-joints are protected from debris by a rubber boot. The clutch mechanism is precisely machined from solid steel to ensure proper function. This in-feed system will feed material at a rate of 58 ft./min.
• 【EASY SWIVEL DISCHARGE CHUTE】:360 degrees of rotation and 2-finger operation. We have incorporated a convenient handle that effortlessly allows you to swivel the discharge chutes that you can direct the chips into the back of a truck or trailer without having to move the entire machine. Simply push down on the handle and swing the chute. When you release the handle a spring-loaded pin drops down to lock the chute into position. No tools re quired.
• 【SAFETY AUTO-FEED STOP BAR】:Safety is paramount on our chippers. Located on the top of the in-feed bin, the WC-8M chipper utilizes an easy-to-activate auto-feed stop safety bar to disengage the in-feed rollers in case of an emergency or to clear the in-feed bin if necessary. This safety bar can be actuated and left in the theoffposition, hands-free. so that the operator can use both hands to clear their-feed bin. This feature is safer because it allows the user to start the chipper without the feed rollers turning. Other chippers require a hand on the safety bar to keep the feed rollers in the off position.
• 【HANDY FEED ROLLER ASSIST HANDLE LOCATED ON TOP OF MACHINE】:This feature allows the user to access the handle from either side of the machineThe center lift point allows the WC-series chipper to use stron ger tension springs, increasing the in-feed ability.
• 【WIDE FOOTPRINT SKID TYPE SUPPORT BASE】:Because of its robust weight and to prevent the machine from sinking into the soft ground during operation, the new WC-8M offers a wide footprint skid type support base. This base is angled upward on the end to prevent digging into the ground while transporting.